Silicone Surface Film for Commercial Millwork and Office CaseworkReception desks, storage walls and store counters are touched by hundreds of people a week. The face on the board decides whether they still look new when the lease comes up for renewal.
We make a silicone-surfaced decorative film on a PET carrier. Commercial millwork and casework shops laminate it to MDF, particleboard or plywood with PUR adhesive, the same flat-lamination route used for PVC film. Buy the film in rolls, or ask us to quote film-faced panels for your fit-out.
Free samples are separate from production orders. Production MOQ: standard film 500 m; panels 200 sheets at 1220 × 2440 mm. Technical guidance for your first lamination trial.
Film sample kit
Commercial millwork and office casework
What Makes Commercial Millwork Different From Residential Cabinetry?
Residential cabinetry expectations
A household opens the same doors for years
Cleaning is occasional and gentle
One kitchen, one order, one decor
The homeowner approves the sample
Nobody asks for test data on the face
Office and commercial requirements
Staff, visitors and customers touch counters and fronts all day
Cleaning crews wipe surfaces every evening, often with alcohol-based products
Chairs, carts and shoes knock lower panels and kick plates
One decor across several floors, branches or stores, often ordered in waves
Architects, general contractors and brand teams sign off the finish
Submittals ask for indoor-air and fire data on the face material
The difference for a millwork shop
A kitchen has to please one family. A bank counter has to look the same in the first branch and the fortieth, and pass the architect's submittal review before anyone cuts a board. Much of that comes down to the face material.
Send us the finish specification from your architect or brand team, and we tell you which points the film already covers.
Real Challenges Facing Commercial Millwork and Fit-Out Projects
01
Rollouts that must match site after site
Retail chains and bank networks fit out one location after another. If the decor drifts between production runs, store number twelve does not match store number one, and the brand team notices. Our commercial interior applications overview links related hotel furniture, healthcare and wall-panel pages.
02
Submittals that hold up the schedule
The architect or general contractor asks for emission and fire data on every finish. A face material without papers sends the submittal back and the millwork package waits.
03
Fronts that wear out before the lease does
Reception desks and counters take bags, elbows, coffee and nightly cleaning. Scuffed or dull fronts make a five-year-old office look tired long before the next refit.
Tell us which of these is slowing down your projects right now.
5 Most Common Problems With Commercial Casework Surfaces
Each problem is followed by what the film does about it and the evidence we can show. Results describe film samples under the stated conditions, not a finished panel or piece of casework.
01Coffee, ink and hand marks
Counters and desk fronts collect coffee rings, pen marks and greasy handprints by the end of every day.
In the manufacturer's laboratory tests, coffee, red wine, soy sauce and lipstick left for 24 hours at 25 °C wiped off with no visible change. Ballpoint pen, water-based and oil-based marker showed no change or slight staining. With a surface energy of about 21 mN/m, liquids bead up on the silicone instead of soaking in. Watch cleaning video↗
24 hoursEvidenceStains: manufacturer laboratory tests. Surface energy: worked examples in our patent application.
02Nightly wiping with alcohol-based cleaners
Some faces turn dull or tacky after a year of the same cleaning routine.
In the manufacturer's laboratory tests, 75% alcohol, 75% acetone and light naphtha were applied to the film and held at 85 °C / 85% RH for 720 hours. After they evaporated, none had left a visible change. Send us the products your cleaning contractor uses and we tell you what data we hold for them.
720 hoursEvidenceManufacturer laboratory tests, film samples.
03Scuffs from chairs, carts and shoes
Lower cabinet panels, desk modesty panels and counter bases take knocks every working day.
A 2H pencil at 500 gf and 45° left no visible scratch. A Taber test (ASTM D4060, CS-10 wheels, 1,000 g per wheel, 2,000 cycles) left slight matting only, with no exposed substrate and no peeling. Dents from hard impacts depend on the board underneath. Watch scratch video↗
2,000 cyclesEvidenceSGS reports SZIN2608002405PL02 and PL04, film samples.
04Indoor-air questions on the finish
Office tenants and their architects ask what each finish adds to the air, before they ask about colour.
The film contains no formaldehyde and has passed SGS testing for formaldehyde emission. It contains no PVC and has also passed SGS testing for REACH SVHC and RoHS. Emissions from the finished panel still depend on the board and adhesive, so check those with their suppliers.
EvidenceSGS formaldehyde emission, REACH SVHC and RoHS tests, film sample. Film formulation, confirmed by the manufacturer.
05Fire documents missing at submittal
If nobody can say how the face material behaves in a flame, the millwork submittal goes back.
The silicone surface is inherently flame-retardant as standard. Higher grades up to UL 94 V-0 are available on request, with the test report for that grade. The fire performance of a finished panel depends on its core and adhesive, so test the assembled product where your project requires it.
UL 94 V-0EvidenceStandard film property. Higher grades supplied with a matching report.
Tell us which documents your architect or general contractor has asked for. We reply with the results we hold.
Why Commercial Projects Leave No Room to Swap the Surface Later
The finish is signed off early
The architect, the tenant or the brand team approves finish samples before shop drawings are final. Changing the face material after that means a new submittal and a new approval round.
Rollouts run for years
A store or branch format is repeated across many sites over several years. The tenth site has to use the same face as the first, or the format stops looking like one brand.
Handover dates do not move
Fit-outs work to a fixed opening or move-in date. A finish that fails review or arrives late lands on the millwork shop, not on the film supplier.
Test the film on your own line before it goes into the sample board.
Nobody sees the board core. Every coffee cup, bag and cleaning cloth lands on the top 20 to 100 μm of silicone, so that layer decides how the casework ages.
02
Edges need a matching plan
The film is flat-laminated, and edges are banded separately. Choose an edge band in a matching decor, because counter corners and desk edges take the first knocks.
03
Data for the submittal
We send film data with its source and test conditions. You add the board, adhesive and edge band papers, and that becomes the package your architect and general contractor review.
Tell us your board, adhesive and edge band, and we check the film fit.
The Right Film or Panel Path for Commercial Projects
Start with film rolls if you laminate in-house. If you do not, we quote the film already bonded to the board. We supply the surface material only: we do not build or install millwork, or sell finished office furniture.
1. Samples and wipe testFree samples. Try them with the stains and cleaning products your client's building uses.
2. Lamination trialRun the film on your PUR flat-lamination line with our technical guidance.
3. Prototype and supplyEvaluate samples for the prototype store or sample desk before production. Production MOQ: standard film 500 m; panels 200 sheets at 1220 × 2440 mm. Film-faced panels are quoted per project.
Available now
Film rolls
For commercial millwork shops, casework makers, retail fixture makers and panel makers with a flat-lamination line.
Silicone surface on a PET carrier, no back adhesive
100+ patterns; custom colours and gloss levels on request
Free samples are separate from production orders; standard film MOQ is 500 m
Not sure which suits your project? Choose "Not sure yet" in the request form and we will recommend one.
Material and process
Material & Process Selection for Office Casework and Millwork
Three choices decide how a finished piece performs: the film build, the board and adhesive, and the surface options.
Film build
Silicone surface layer 20–100 μm over a silicone structural layer of 100–250 μm
Silicone bonding layer anchored to a PET carrier of 80–1,000 μm
Layers cured in sequence so they crosslink into one network instead of sitting as separate coats
Board and adhesive
PUR hot-melt adhesive on a flat-lamination line
MDF, particleboard, plywood or any board you already face with PVC film
Flat lamination only; profile wrapping and 3D pressing are not supported
Surface options
100+ patterns, plus custom colours and gloss levels to match a brand palette
Optional soft-touch layer, 5–30 μm
Optional higher flame-retardant grades, up to UL 94 V-0
How the film compares with other casework faces
Face materials used on commercial casework, compared on the points architects and millwork shops ask about. The last three columns describe each material class in general.
What you compare
Puremorfilm silicone film
PVC decorative film
High-pressure laminate (HPL)
Melamine-faced board
PVC in the face
None
PVC-based
None
None
Resin in the face material
Silicone, no formaldehyde in the film
PVC
Melamine and phenolic resins
Melamine-formaldehyde resin
Surface feel
Soft, leather-like touch
Smooth plastic
Hard resin
Hard resin
How it gets onto the board
PUR flat lamination on your line
Flat lamination or membrane pressing
Sheets glued to the board in a press
Pressed onto the board at the board mill
Edges
Separate matching edge band
Edge band, or wrapped in membrane pressing
Edge band or HPL edge strip
Separate matching edge band
Tell us your board and line, and we suggest a film build and pattern set.
Test Data & Compliance Documents for Commercial Casework
SGSformaldehyde emission
SGSREACH SVHC
SGSRoHS
FourSGS reports on the film
ISO9001 / 14001
Chemical tests
Formaldehyde, REACH and RoHS
The film has passed SGS testing for formaldehyde emission, REACH SVHC and RoHS. Reports and ISO 9001 / ISO 14001 certificates are available with your enquiry. Certificates are issued to our sister company, which develops the silicone formulation.
Performance tests
Four SGS reports on the film
PL01: 0.06% / 0.10% length and width change after 100 °C for 600 minutes
PL02: no visible scratch, 2H pencil at 500 gf
PL03: tensile test, two specimens (reference only; specimens broke outside the gauge marks)
PL04: Taber abrasion, 2,000 cycles, slight matting only
Support
Your project file
Fire and emission requirements for commercial interiors apply to the finished casework and the board, so your testing lab and board supplier confirm them. We supply the film data for that file, each figure labelled by source: SGS report, manufacturer laboratory test or patent application (pending).
Tell us which documents your architect, general contractor or brand team has asked for.
From First Sample to Rollout Supply: A Predictable Path
1. Specification and samples
Send the finish specification and the patterns you like. Free samples ship in 3–5 working days.
2. Wipe test and lamination trial
Test with your client's stains and cleaners, then laminate a trial run on your line with our guidance.
3. Prototype site
Evaluate samples for the prototype store, sample desk or first floor. For production orders: standard film 500 m; panels 200 sheets at 1220 × 2440 mm.
4. Project and rollout supply
Bulk and repeat orders against the approved colour reference, from six lines with over 1 million m² of monthly capacity.
Typical lead times
Standard film orders take 15–25 days after deposit. Custom patterns add 7–10 days for proofing. Film-faced panels are quoted per project, with lead times in line with standard PVC-faced panels.
Give us your submittal and handover dates and we work back to a sample and order schedule.
Why Millwork Shops Choose Puremorfilm for Commercial Projects
10+years in decorative surface materials
sixlines
1 millionm² of monthly capacity
100+patterns
01
Factory direct
Printing, silicone coating, curing and slitting run on our own six lines. You deal with the plant that makes the film, with 10+ years in decorative surface materials. Watch the factory video↗
02
Chemistry behind the surface
The silicone formulation comes from our sister company. Its chemists support grade changes such as a soft-touch layer or a higher flame-retardant grade.
03
Built for rollouts
Free samples are separate from production orders. Production MOQ: standard film 500 m; panels 200 sheets at 1220 × 2440 mm. Over 1 million m² of monthly capacity for the rollout. Custom decors to match a brand palette, and film-faced panels when a project needs them.
The film ran on our existing lamination line after one trial. Color consistency between batches has been reliable, and the pre-shipment photos save us a lot of back-and-forth.
Production Director, cabinet and wardrobe maker, United States
The custom wood grain we developed with their team now sells as our own private-label range. Samples arrived quickly and the swatch book helps our dealers close orders.
Owner, wall panel distributor, Canada
Customer names are withheld at their request.
Building Commercial Casework or Planning a Rollout? Let's Discuss Your Project
Which parts of commercial casework can the film go on?
Vertical and low-wear faces laminated flat onto board: cabinet and locker doors, drawer fronts, storage walls, desk modesty panels, reception desk and counter fronts, and display fixture panels. Keep it off desk tops, counter tops, worktops and floors, because the surface has a leather-like give.
Is the film formaldehyde-free?
Yes. The film contains no formaldehyde and has passed SGS testing for formaldehyde emission. The finished panel's emissions also depend on the board and adhesive, so check those with their suppliers.
Will office cleaning products damage the surface?
In the manufacturer's laboratory tests, 75% alcohol, 75% acetone and light naphtha held on the film at 85 °C / 85% RH for 720 hours left no visible change. Send us your cleaning contractor's product list and we tell you what data we hold for each.
Is the film flame-retardant?
Yes. The silicone surface is inherently flame-retardant as standard, and higher grades up to UL 94 V-0 are available on request. The fire performance of a finished piece depends on its core and adhesive, so test the assembled product where your project requires it.
Do you build millwork or sell office furniture?
No. We supply the film, and film-faced panels on request. Your millwork shop, casework maker or fixture maker builds and installs the finished pieces.
Can you keep the decor consistent across a multi-site rollout?
Yes. Reorders are produced against the colour reference approved for your project, and we keep a retained sample from each batch.
Request received
We reply by email with the samples, documents or quote you asked for.