puremor FILM
Silicone decorative film interior surface

SILICONE DECORATIVE FILM MANUFACTURER

A new, eco-friendly
surface material.

Puremorfilm is a Chinese manufacturer of silicone decorative film and silicone laminated panels, with a silicone functional surface on a PET support film. We supply rolls without a self-adhesive backing for PUR flat lamination, or laminated panels quoted per project, for furniture fronts, cabinet doors, wall panels and other vertical or low-wear surfaces; neither supply form is suitable for floors, countertops or stovetops.

PVCMelaminePPSilicone

PVC-freeNo added formaldehydeNo DOP

A NEW SURFACE, TWO SUPPLY FORMS

Meet silicone decorative film.

A crosslinked silicone surface on a PET support film. It brings a soft touch and an easy-clean decorative finish to furniture and interiors.

Choose film rolls for your own lamination, or laminated panels with the surface already bonded to a core board. PVC-free, with no added formaldehyde and a No DOP formulation in the film; panel construction is confirmed separately.

Why Choose Silicone Decorative Film?

A soft-touch finish with a PVC-free composition, practical surface protection and a choice of decorative effects.

PVC-free silicone decorative film roll

PVC-free composition

No PVC, no added formaldehyde and a No DOP formulation in the film. Confirm the adhesive and core board separately.

What do these properties apply to?Film and whole-panel scope

Film results apply to the tested grade and conditions. For a laminated panel, the film, adhesive and core board form one construction and need their own assessment. The silicone film is flame retardant. Fire classifications apply to the tested construction; stain and scratch results depend on the stated method.

The technical white paper records a 2H pencil test at 500 gf and a Taber test at 2,000 cycles. Matching methods, specimen details and records are provided in the quality-control section below.

Compare the surface you use today

Compare surface feel, cleaning, composition, flame retardancy and long-term stability before choosing your next finish.

Compare with:
Six buyer questions comparing silicone film with four conventional surfaces.
Buyer question Silicone decorative film PVC decorative film Melamine-impregnated paper Printed PP decorative film Painted surface
Soft to the touch? Yes: Soft, skin-like touch Partly: Smooth plastic surface No: Hard surface feel Partly: Plastic surface feel Partly: Feel depends on the coating
Easy to wipe clean? Yes: Clean with water and a damp cloth Partly: Dirt can collect in textured grooves Yes: Smooth surfaces wipe clean easily Partly: Cleanability depends on the protective coating Varies: Matte coatings can show stains
No added formaldehyde? Yes: No formaldehyde added Yes: Usually no formaldehyde added No: Uses melamine-formaldehyde resin Yes: Usually no formaldehyde added Partly: Depends on the coating formulation
No DOP? Yes: No DOP Check: DOP content depends on the formulation Yes: No DOP (typically) Yes: No DOP (typically) Partly: Depends on the coating formulation
Is the silicone surface flame retardant? Yes: Inherently flame retardant Partly: Depends on the film formulation Partly: Depends on the finished board No: Requires flame-retardant treatment Partly: Depends on the coating and substrate
Resists yellowing and brittleness? Yes: Stable for years; no yellowing or brittleness No: Can turn yellow and become brittle Varies: Ageing depends on the resin and finish Partly: Ageing depends on the film and coating Partly: Some light-coloured coatings can yellow

Silicone decorative film is available in woodgrain, leather, stone, solid-colour and custom designs.

The silicone column describes our decorative film. Other materials vary by formulation and finish. Laminated-panel performance also depends on the adhesive and core board.

Industries and Applications We Support

Find the surface you need for the part you make. Film grade, substrate and processing are selected for the actual application.

Furniture and interiors

Kids' furniture with formaldehyde-free decorative film

Kids' furniture and kindergartens

Furniture fronts, storage and wall surfaces for children's rooms and early-learning spaces.

Hotel interior decorative panels

Hotels and commercial interiors

Furniture, wall panels and display cabinets for hotels, retail and commercial interiors.

Office desks with scratch-resistant decorative film

Offices and schools

Desk fronts, partitions and storage that resist scratches and everyday marks.

Specialist applications to evaluate

Smartphones & wearables
Phone back covers, 3C cover materials, watch straps and soft-touch wearable surfaces.
Healthcare & public spaces
Clinic walls, doors and cabinets; school interiors, retail displays and transport-terminal wall panels.
Marine & outdoor surfaces
Yacht interiors, sun-exposed cabinetry and exterior facing panels, evaluated for the intended exposure.
Projection & translucent surfaces
Projection-screen materials and light-transmitting automotive decorative surfaces. Projection screen film →
Automotive interiors
Door trims and other specified interior surfaces; match touch, cleanability and validation to the vehicle program.

Tell us the contact, cleaning and exposure conditions. We review the film grade, substrate and processing method against your requirements. Floors and kitchen worktops are outside our standard recommended uses.

Tell us the part, contact conditions and environment. We will help select a suitable film or panel.

Film Rolls or Laminated Panels

Choose the supply form that fits your equipment and purchasing plan.

Wood grain silicone laminated panel Supplied as panels

Silicone Laminated Panels

Boards with the silicone surface already bonded to a selected core. Confirm the construction before cutting and machining.

Use for
Furniture parts, cabinet doors and interior panels
Confirm
Core board, thickness and panel dimensions
Check
Whole-panel properties and machining requirements

Whole-panel performance is confirmed for the actual combination of film, adhesive and core board.

Your finish, in either format.Wood · Leather · Fabric · Stone · Solid colours · CustomExplore finishes ↓

Why Choose Puremorfilm

From application evaluation to repeat supply, our team helps turn a new surface material into a workable product specification.

Soft-touch silicone decorative film samples
  • R&D and application support

    Discuss the surface, substrate and process with our R&D team before choosing a grade.

  • Technical project experience

    Automotive and mobile-phone applications include volume production, alongside development work in wearables and projection.

  • Production and repeat supply

    Printing, coating and lamination capacity supports repeat orders to an agreed specification.

  • Clear order planning

    Approve samples, specifications and acceptance criteria before bulk production. Confirm the schedule for your order.

Monthly film capacity
1M+ m²
Production lines
6 printing, coating & lamination
Sample dispatch
3–5 working days
Standard bulk production
15–25 days after deposit

Typical lead times are confirmed for each order. Custom patterns require an additional 7–10 days for proofing and approval.

Kids' room furniture with silicone decorative film
Wardrobe and cabinet decorative filmLiving room decorative wall and furniture film

CUSTOMER FEEDBACK

What Our Customers Say

Feedback on touch, processing, cleaning and technical support. Customer names are withheld at their request.

We switched our children's furniture line to Puremorfilm film. The soft-touch surface was the first thing our retail buyers noticed, and the formaldehyde-free test reports made our compliance review much faster.
Purchasing ManagerFurniture manufacturer, Germany
1 / 6

From Your First Sample to Your Production Order

A clear sequence of decisions, from material selection to delivery.

Silicone decorative film sample kit
  1. 01

    Tell us what you make

    Share your application, supply form, substrate and surface requirements.

  2. 02

    Select and quote

    Confirm the film or panel direction, sample options and quotation basis.

  3. 03

    Evaluate your samples

    Check colour, texture and touch; run a lamination trial where needed.

  4. 04

    Approve in writing

    Agree the pattern, specification, quantity and acceptance criteria.

  5. 05

    Produce and inspect

    We make the order to the approved specification and check the batch.

  6. 06

    Pack and deliver

    Confirm labels, protection, documents, destination and shipping terms.

Plan your timing

Sample dispatch: 3–5 working days. Standard bulk production: 15–25 days after deposit. Custom patterns add 7–10 days for proofing and approval. Final timing is confirmed for each order.

How We Keep Your Order Consistent

Approve the reference sample, check the production batch and review the documents for the grade you are buying.

Workers inspecting white base film on a roll inspection table
  • Approve before bulkEvery new pattern is proofed as a sample; bulk starts only after your written approval.
  • Batch records and retained samplesA retained sample and production record for every batch, so any question can be traced.
  • Pre-shipment photosPhotos of goods, labels and packing before loading, plus an inspection report on request.
  • Match the technical evidenceConfirm the film grade, specimen, method and acceptance criteria; panel construction is assessed separately.

Measured film performance

Pencil scratch

No obvious scratches

2H pencil · 500 gf · 45° · three strokes ≥20 mm. White paper summary of SGS PL02.

Taber abrasion

2,000 cycles

Slight mattification; no concentrated scratches, exposed backing or peeling. CS-10, 1,000 g per wheel, 60 rpm. SGS PL04 summary.

Thermal dimensional change

0.06% / 0.10%

Length / width after 100°C for 600 minutes and 14-hour room-temperature recovery. SGS PL01 summary.

Source: technical white paper V1.0 (October 2026). SGS report summaries, laboratory records and patent worked examples are identified below. Results apply to the tested specimens and conditions; request the record matching your grade.

SGS report summaries — four film tests
Test item Recorded result Test conditions Source & scope
Pencil scratch No obvious scratches 2H pencil; 500 gf load; 45° angle; three strokes, each ≥20 mm. SZIN2608002405PL02_EN
26 Aug 2026. Tested film specimen; resistance under these tool and load conditions.
Taber abrasion 2,000 cycles: slight mattification only; no concentrated scratches, substrate exposure or coating peeling. ASTM D4060-25; CS-10 wheels; 1,000 g per wheel; 60 rpm. SZIN2608002405PL04_EN
27 Aug 2026. Surface-wear evidence for the tested film; assess against the intended wall or furniture use.
Thermal dimensional stability Length change 0.06%; width change 0.10%. 100°C for 600 minutes, followed by 14 hours at room temperature. Lab environment: 23±2°C, 50±5% RH. SZIN2608002405PL01_EN
26 Aug 2026. Supports dimensional and processing evaluation of the tested film.
Tensile breaking force & elongation A1: 216.4 N / 51%
A2: 126.3 N / 67%
Specimen thickness: A1 0.473 mm; A2 0.605 mm.
JIS K 6732:1996+AMD.1:2006 and client requirements; 200 mm/min; 40 mm gauge length; 23±2°C, 50±5% RH. SZIN2608002405PL03_EN
27 Aug 2026. N is breaking force. Specimens 1 and 2 broke outside the gauge marks; those results are for reference only.
Laboratory records — stains & cleaning
Test item Recorded result Test conditions Source & scope
Food, drink & cosmetics No visible change after wiping: coffee, red wine, ice cream, soy sauce, Worcestershire sauce and lipstick. Contaminants applied to the film surface; held at 25°C for 24 hours, then wiped. Laboratory data, white paper §6.2. Results apply to the stated exposure and wiping method; match cleaners to the supplied grade.
Pen & marker marks No visible change or slight staining: ballpoint pen, water-based marker and oil-based marker. Same recorded method: 25°C for 24 hours, followed by wiping. Laboratory data, white paper §6.2. The recorded result varies; confirm the contaminant-specific result for the chosen film.
Patent worked examples — interlayer stability & antibacterial grade
Test item Recorded result Test conditions Source & scope
Internal film interlayer peel BOPET system: ≥3 N/15 mm
TPU system: ≥3.5 N/15 mm.
180° peel; BOPET backing 125 μm and TPU backing 200 μm. Patent worked examples 1 and 2, white paper §5.4. Internal film interface only; does not establish film-to-board adhesive strength.
Damp-heat ageing No delamination or blistering. 85°C / 85% RH for 500 hours. Patent worked-example data, white paper §5.4. Confirm the corresponding construction for supply.
Thermal cycling No delamination or blistering. −40°C to 85°C; 100 cycles. Patent worked-example data, white paper §5.4. Applies to the evaluated example construction.
Boiling-water exposure No delamination or blistering. Boiling water for 12 hours. Patent worked-example data, white paper §5.4. Confirm film grade and construction.
Antibacterial reduction ≥99% against Escherichia coli and Staphylococcus aureus. Recorded for an antibacterial worked-example formulation. Confirm formulation grade and corresponding test conditions. Patent worked-example data, white paper §9. Antibacterial performance is grade-specific; request evidence for the supplied model.
Surface wettability Water contact angle approximately 108° in the worked example; stated range 100°–115°. Worked-example surface measurement; full measurement conditions to be matched to the grade. Patent worked-example data, white paper §6.1. A wettability measure for the evaluated surface.
Additional laboratory records — weathering & exposure
Test item Recorded result Test conditions Source & scope
Accelerated ageing No visible change after 2,000 hours. White paper records JIS B7753 light and water exposure testing. Laboratory data, white paper §7.2. Confirm the original exposure program and film grade for a weathering specification.
Yellowing resistance Grade ≥4. QUV-A testing, as recorded; duration and grading details to be confirmed with the matching test record. Laboratory data, white paper §7.2. Compare only with a matching procedure and grading scale.
Hydrolysis exposure Recorded duration ≥10 weeks. 85°C / 85% RH. Laboratory data, white paper §7.2. Request the appearance/strength acceptance criteria for the specified grade.
Salt-spray exposure Recorded duration ≥1,000 hours. ASTM B117, as recorded in the white paper. Laboratory data, white paper §7.2. Project acceptance criteria and the post-exposure result are confirmed separately.
Water staining Class 5. ISO 105-E01 / ASTM D1735-2021, as recorded. Laboratory data, white paper §7.2. Confirm the grading procedure and specimen.
Perspiration staining Class 5. ISO 11641:2012 / ISO 105-E04, as recorded. Laboratory data, white paper §7.2. Confirm the intended contact conditions and film grade.

Inside Our Factory

Puremorfilm makes silicone decorative film and laminated panels in China. Base-film extrusion, coating, embossing, slitting and flat lamination run on our own lines.

Silicone film production floor at PuremorfilmWatch videoFACTORY FILM1:15

ON THE PRODUCTION FLOOR

See our factory in action.

Take a closer look at the people, equipment and processes behind our silicone leather and functional films.

Watch the factory film75 seconds · English narration

See our production lines on a live video factory tour or an on-site visit.

How our film is made

  1. Clear polymer pellets used as base film raw material
    01

    Raw materials

    Polymer pellets for the base film.

  2. Film extrusion line with operators in a clean production hall
    02

    Extrusion

    The base film is extruded from the pellets.

  3. Online thickness gauge measuring film across the web
    03

    Thickness check

    An online gauge measures thickness across the film.

  4. Freshly extruded white base film wound on a roll
    04

    Base film

    The extruded film is wound into rolls.

  5. Roll-to-roll coating machines on the film production floor
    05

    Coating

    The silicone surface is coated onto the base film.

  6. Operator loading a film roll on a slitting machine
    06

    Slitting

    Rolls are slit to the ordered width.

  7. Wrapped film rolls on pallets loaded into a shipping container
    07

    Finished film

    Rolls are wrapped, palletised and shipped.

Project experience behind Puremorfilm

Our team's materials development and validation work covers consumer electronics, automotive interiors, wearables and projection. Automotive and mobile-phone applications include volume production.

  • Chinese flagship 3C cover project

    3C cover-material development and validation for a major Chinese technology manufacturer.

  • Flagship SUV & executive sedan projects

    Automotive materials work for premium new-energy SUV and executive-sedan programs.

  • Home-cinema projection-screen project

    Projection-screen materials work for a smart-projection equipment brand.

  • International smartphone cover project

    Phone-cover materials development and validation for an international mobile-phone brand.

  • Automotive cloud-effect translucent series

    Materials work on a cloud-effect, light-transmitting automotive decorative series.

  • International watch-brand strap materials

    Soft-touch, wipe-clean strap and wearable surface materials developed for watch brands.

For a new project, the supply specification and validation scope are agreed for the intended application. Marine and outdoor uses require review of the relevant project requirements.

Choose Your Pattern, Colour and Texture

Explore wood, leather, fabric, stone and solid finishes, or develop a pattern for your product line.

Custom Decorative Film and OEM Development

Develop a finish for your product line. Send a reference, review the proof sample and approve the specification before bulk production.

Custom pattern silicone decorative film

Custom patterns and colors

Send artwork, a physical sample or a color code; we develop and proof the pattern for approval.

Custom specifications

Base film, thickness, width, gloss level and texture set to your production needs.

Private label and packaging

Your brand on cores, labels and cartons for distributors and furniture brands.

Lamination and processing support

Guidance on adhesives, substrates and lamination settings for a smooth trial run.

  1. Send your brief
  2. Pattern and spec proposal
  3. Proof samples
  4. Your approval
  5. Bulk production

Have a pattern, color or spec in mind? Start a custom project.

Specifications and Processing Fit

Confirm the supply specification and the complete processing system before ordering.

Film-roll and laminated-panel specifications

Item Film rolls Laminated panels
Effective film width 1240 / 1260 / 1400 mm Panel size: 1220 × 2440 mm
Roll length 50 / 100 / 250 / 500 m Supplied as finished panels
Support film PET support film as standard production; the visible surface is always silicone. PC, TPU and other support films for development projects. Film grade matched to the core board and application
Thickness Total composite-film thickness and tolerance confirmed by grade Core material and board thickness confirmed for the order
Back adhesive Standard film is supplied without back adhesive. Discuss adhesive requirements with us. Film bonded to a selected core board; construction confirmed separately
Surface options Wood, leather, fabric, stone, solid colours and other textures; gloss and functional grade selected by application

Dimensions and material options are recorded in the technical white paper, V1.0. Available width, roll length, backing and surface combinations are confirmed for the selected model.

Silicone decorative film laminated panel structure

Substrate and adhesive

Identify the core board or substrate and the intended adhesive. Standard film has no back adhesive; trial the complete bonding system.

Equipment and trial parts

Share the lamination method, temperature and part geometry. Evaluate representative edges, corners and openings before production.

Acceptance and test scope

Agree colour, texture, dimensions and performance criteria. Film interlayer data does not establish film-to-board bond strength.

Packing, Delivery and Quotation Factors

Agree how the goods will be protected, shipped and quoted for your order and destination.

Decorative film roll with protective export wrapping
Decorative film cartons on pallet beside shipping container

Roll and panel protection

Rigid cores, protective foam or wrapping, and reinforced ends protect film rolls. Cartons or secured pallets suit bulk shipments; panels use edge protection and separators.

Export documents

Commercial invoice and packing list match the shipment. Confirm any certificate of origin, transport document or applicable test report needed for your destination.

Sea, air and courier

Sea freight suits bulk orders; air freight or express courier can suit samples and urgent smaller orders. EXW, FOB or CIF terms are confirmed in the quotation.

Pre-shipment inspection

Confirm product labels, roll or panel condition, carton counts and pallet protection. Request packing photos before loading and keep shipment records for receiving checks.

What goes into your quotation?

Film grade and supply form · Pattern or custom development · Width, length, board construction and quantity · Packing protection · Destination, freight and EXW, FOB or CIF terms.

Share these details so material, processing, packing and transport can be quoted on the same basis.

Send the supply form, quantity and destination for your project quotation.

Before You Place an Order

Answers about samples, order quantities, timing, custom work and material selection.

Have a question that is specific to your project?

Ask About My Requirements
What is silicone decorative film?

A new surface material: a crosslinked silicone surface on a PET support film. It replaces PVC films, melamine paper and printed PP films on furniture, wall panels and other surfaces — with no formaldehyde, a No DOP formulation and a soft, wipe-clean finish.

Is it a PVC-free film?

Yes. The film is PVC-free and uses a No DOP formulation. Request ageing data for the selected grade.

Are you a manufacturer or a trading company?

We are a manufacturer. Pattern printing, silicone coating, curing and lamination run on our own production lines in China. Video factory tours and on-site visits are welcome.

What is the difference between film rolls and laminated panels?

Film rolls are for your own lamination or wrapping line. Laminated panels arrive with the film already bonded to a core board, ready to cut and use.

Can you make custom patterns, colors or specifications?

Yes. Send artwork, a physical sample or a color code, and we develop and proof the pattern for your approval. Thickness, width, base film and texture can also be customized.

What is your minimum order quantity?

Standard film rolls start at 500 m; laminated panels are 1220 × 2440 mm and start at 200 sheets. Custom finishes are available on request. Several patterns can be combined in one order.

What is your lead time?

Samples ship within 3–5 working days. Bulk orders of standard patterns take 15–25 days after deposit; custom patterns add 7–10 days for proofing and approval.

Do you provide samples?

Yes. We send a swatch book and A4 samples of the patterns you choose. A4 samples and the swatch book are free; you only cover express shipping.

If the film is non-toxic and formaldehyde-free, is the whole panel too?

Film properties and whole-panel properties are stated separately. For laminated panels, the adhesive and core board are confirmed with matching test reports.

Which certificates and test reports can you provide?

Our quality system is certified to ISO 9001 and ISO 14001, and our film grades are tested by SGS for formaldehyde emission, REACH SVHC and RoHS. Flame-retardancy reports are available for selected grades. Copies are sent on request for the grade you are evaluating.

How should the surface be cleaned?

Wipe with a damp cloth or mild household cleaner. For special stains or strong cleaners, check the care guide or ask us first.

Knowledge Center

Decorative Film Knowledge & Insights

Explore practical guides to decorative film selection, surface performance, lamination and quality control. Make informed material decisions for furniture and interior projects.

Explore more decorative film insights and application guides.

Visit Our Knowledge Center

Tell Us What You Are Making

Request samples, a quotation, technical documents or an application review. Tell us what you already know; only your email is required.

Silicone decorative film roll
  • Film and panel samples
  • Material and performance documents
  • Sourcing and application evaluation

Submit your requirements

Only email is required. Add any product or project details you already have.

Please enter your email address.

    Add company, location or specifications

    We use your email to reply to this enquiry.

    Requirements submitted

    We will contact you based on the information you provided. In the meantime, you can keep exploring film rolls, laminated panels and applications.

    Continue browsing products

    A better surface starts here

    See the difference before you decide.

    Before you settle for another ordinary finish, explore a surface that could set your product apart.

    Please enter a valid email address.

      Only email is required. We'll use it to reply to your inquiry.

      Puremorfilm video