Wear before the next renovation
Scuffed fronts and chipped edges show up in guest photos long before the planned refresh. See our commercial interior applications overview for other furniture and wall-surface project settings.
Hotel casegoods makers and millwork shops laminate our silicone film to MDF, particleboard or plywood with PUR adhesive, on the same flat-lamination line they use for PVC film. Buy film rolls, or ask us to quote film-faced panels for your project.
Free samples are separate from production orders. Production MOQ: standard film 500 m; panels 200 sheets at 1220 × 2440 mm. Technical guidance for your first lamination trial.

Scuffed fronts and chipped edges show up in guest photos long before the planned refresh. See our commercial interior applications overview for other furniture and wall-surface project settings.
Coffee and makeup come off with strong cleaners, which can leave marks of their own.
A replacement door a shade off shows the moment it stands beside the original.
Results describe film samples under the stated conditions, not a finished panel or piece of furniture.
Coffee, red wine, soy sauce and lipstick left for 24 hours at 25 °C wiped off with no visible change. Liquids bead up on the silicone instead of soaking in. Watch cleaning video
24 hEvidenceOur laboratory tests.
75% alcohol, 75% acetone and light naphtha held on the film at 85 °C / 85% RH for 720 hours left no visible change.
720 hEvidenceOur laboratory tests.
A cigarette at 200–300 °C held on the film for 30 seconds or longer left no obvious change. This is a hot-contact test, not a fire rating. Watch cigarette-contact video
200–300 °CEvidenceOur laboratory test.
Taber test (ASTM D4060, CS-10, 1,000 g per wheel): slight matting only after 2,000 cycles. A 2H pencil at 500 gf left no visible scratch. Watch scratch video
2,000 cyclesEvidenceSGS reports PL02 and PL04.
The silicone surface is inherently flame-retardant. Higher grades up to UL 94 V-0 are available on request. Test the assembled panel where your project requires it.
UL 94 V-0EvidenceOptional grade, supplied with its report.
Tell us which documents your designer or hotel brand has asked for.
Discuss your challengesChanging the face later means new samples and a new approval round.
Hundreds of identical rooms, often in phases. A batch that varies becomes a punch list.
Replacing fronts takes the room off sale, and the owner remembers whose furniture caused it.
Every cup, suitcase and cloth lands on the top 20–100 μm of silicone.
The film is flat-laminated; band the edges in a matching decor.
Film data with source and conditions, ready to add to your board and adhesive papers.
Film rolls if you laminate in-house; film-faced panels if you do not. We supply the surface material only, not finished furniture or FF&E procurement.

For casegoods makers, millwork shops and panel makers with a lamination line.

For fit-out contractors, FF&E procurement teams and makers without a lamination line.
Silicone layers cured in sequence into one crosslinked network, anchored to a PET carrier.
PUR hot-melt on a flat-lamination line. Profile wrapping and 3D pressing are not supported.
100+ patterns, custom colours and gloss, optional soft-touch layer and higher flame-retardant grades.
| What you compare | Puremorfilm silicone film | PVC decorative film | High-pressure laminate (HPL) | Melamine-faced board |
|---|---|---|---|---|
| PVC in the face | None | PVC-based | None | None |
| Resin in the face material | Silicone, no formaldehyde in the film | PVC | Melamine and phenolic resins | Melamine-formaldehyde resin |
| Surface feel | Soft, leather-like touch | Smooth plastic | Hard resin | Hard resin |
| How it gets onto the board | PUR flat lamination on your line | Flat lamination or membrane pressing | Sheets glued to the board in a press | Pressed onto the board at the board mill |
Tell us your board and line, and we suggest a film build and pattern set.
Review material options
Every pattern is checked against the reference approved for your project.
If a hotel reports a problem, we test that batch and tell you the cause.
New patterns are trialled on your board first, so later phases match the first.
Reports and ISO certificates are issued to our sister company, which develops the silicone formulation.
Fire and emission rules apply to the finished product and the board. We supply the film data, each figure labelled by source.
Tell us which documents your designer, hotel brand or procurement team has asked for.
Request test reports
Wardrobe doors, dresser and nightstand fronts, luggage benches, minibar and TV units.
Reception desk fronts, lobby storage and concierge counters from hotel millwork shops.
Headboard and wall panels matching the casegoods. See our hotel wall panels page.
Keeping the carcasses and replacing only the fronts? Film-faced panels let you renew doors and drawer fronts in the new decor.
Tell us which pieces or areas the film is for, and we match a pattern and grade to each.
Discuss your applicationFree samples of the patterns you like.
Wipe test, then a trial run with our guidance.
Evaluate samples for the mock-up room or pilot floor. For production orders: standard film 500 m; panels 200 sheets at 1220 × 2440 mm.
Bulk and repeat orders against the approved reference.
Standard film: 15–25 days after deposit. Custom patterns add 7–10 days for proofing. Film-faced panels: quoted per project, lead times in line with standard PVC-faced panels.
Give us your mock-up and opening dates and we work back to a sample and order schedule.
Map your pathThe film ran on our existing lamination line after one trial. Color consistency between batches has been reliable, and the pre-shipment photos save us a lot of back-and-forth.
The custom wood grain we developed with their team now sells as our own private-label range. Samples arrived quickly and the swatch book helps our dealers close orders.
Customer names are withheld at their request. The silicone formulation comes from our sister company.
Vertical and low-wear faces laminated flat onto board: wardrobe and closet doors, drawer and nightstand fronts, side panels, headboard panels, TV wall units and reception desk fronts. Keep it off vanity tops, bar tops, worktops and floors, because the surface has a leather-like give.
In our laboratory tests, a cigarette at a surface temperature of 200–300 °C held on the film for 30 seconds or longer left no obvious change. That is a hot-contact result, not a fire rating.
In our laboratory tests, 75% alcohol, 75% acetone and light naphtha held on the film at 85 °C / 85% RH for 720 hours left no visible change. Send us your housekeeping product list and we tell you what data we hold for each.
Yes. The silicone surface is inherently flame-retardant as standard, and higher grades up to UL 94 V-0 are available on request. The fire performance of a finished piece depends on its core and adhesive, so test the assembled product where your project requires it.
No. We supply the film, and film-faced panels on request. Your casegoods maker, millwork shop or procurement team builds and delivers the furniture.
Yes. Reorders are produced against the colour reference approved for your project, and we keep a retained sample from each batch.
We reply by email with the samples, documents or quote you asked for.