PVC-free organosilicon film in rolls or laminated wall panels

Decorative Wall Film for Interior Wall Panels

PVCMelaminePPSilicone

Puremorfilm is a Chinese manufacturer of silicone decorative film and silicone laminated panels, with a silicone functional surface on a PET support film. We supply rolls without a self-adhesive backing for PUR flat lamination, or laminated panels quoted per project, for furniture fronts, cabinet doors, wall panels and other vertical or low-wear surfaces; neither supply form is suitable for floors, countertops or stovetops. Our organosilicon decorative wall film offers stain-resistant, easy-clean surfaces for feature walls, corridors and reception areas, with soft-touch finishes available by specification.

  • 2H pencilNo visible scratch under 500 gf load (SGS)
  • 2,000 Taber cyclesSlight matting only, no coating loss (SGS)
Soft-touch silicone decorative film samples

Are These Wall Problems Holding Your Project Back?

Most interior wall finishes look right on handover day. The trouble starts with daily use, large-area installation and the paperwork behind acceptance. Each question below links to the part of this page that answers it.

  • Decorative wall film panel wiped with cleaning cloth

    Will coffee and sauce splashes leave a permanent mark?

    Porous wall panels absorb spills, and every stain that stays becomes a cleaning complaint or a repair ticket.

    See the 24-hour stain record
  • Decorative wall film with pen marks and cloth

    Do pen marks mean scrubbing until the surface changes?

    Repeated scrubbing can dull the colour or polish the texture, so the cleaned patch no longer matches the rest of the wall.

    See how ink marks were cleaned
  • Hotel decorative wall panels beside housekeeping trolley

    Can the finish handle luggage, carts and constant traffic?

    Corridor and lobby walls take daily rubbing, and wear lines show first on the most visible panels.

    See scratch and abrasion results
  • Wood grain decorative wall panels in hotel reception

    The sample looked great. Will a full wall look the same?

    A palm-sized swatch rarely shows grain direction, joints or how the surface reads under your lighting.

    See how the film is built
  • Decorative film panel with lifted edge and bubble

    Why does laminated film bubble or lift at the edges?

    Bubbles and edge lifting usually trace back to the panel core, adhesive or process, not only to the film itself.

    See the film-to-panel build
  • Decorative wall film test review checklist for sample identity, conditions and result limitations

    Does the test data actually match your acceptance checklist?

    A safety claim on a product guide is hard to defend if nobody can say which sample was tested, how and against what.

    See how claims are documented

Check your wall finish point by point, from the surface material to how it laminates onto your panels.

Discuss My Wall Project

Select a layer to see what it does on the wall.

Decorative wall film
Laminated wall panel

Organosilicon surface coating

The silicone surface layer provides the decorative texture and the stain-resistant functional face. An optional tactile layer sits above it. Cleaning and scratch performance depend on the selected formulation and are assessed under stated test conditions.

Schematic for explanation, not to scale. The exact build is confirmed for each model.

How Does One Film Become a Functional Wall Finish?

A decorative film for wall panels does two jobs at once: it gives the wall its colour, grain and touch, and it adds a working surface that handles stains and wear. The film never works alone, though. The lamination adhesive and the panel core complete the wall panel, so choosing the right film also means checking the full build it will be pressed onto.

  • Decorative effect

    Wood grain, solid colours, leather and fabric textures provide different decorative directions. Approve the physical colour standard, pattern repeat and grain direction before specifying a full wall.

  • Surface function

    The organosilicon coating adds stain resistance, easy cleaning and scratch resistance at the surface, so maintenance stays simple in busy spaces.

  • Processing fit

    Film width, roll length and backing are matched to your core and adhesive, which lowers the risk of bubbles, edge lifting and wasted panels.

Tell us your panel core and lamination process, and we will suggest the film build that fits.

Find My Wall Panel Structure

Why Panel Makers and Project Buyers Work With Puremorfilm

Choosing a wall finish also means choosing who stands behind it. Puremorfilm helps you define the film specification, review the available test data and validate samples before an order. Production arrangements and a supplier video review can be discussed for your project.

  • Film specification and process support

    We confirm the film model, surface formulation, roll dimensions and lamination route, with production and acceptance details agreed before an order.

  • Surface formulation for your application

    The supplied literature covers furniture, wall panels and automotive interiors. We select the coating and carrier for your project and confirm cleaning, wear and processing requirements on the proposed film model.

  • Third-party test reports

    Scratch, abrasion, dimensional stability and tensile results come from SGS reports, with conditions stated, so your technical team can check the evidence themselves.

  • See it before you buy

    Test physical samples on your own core and request a video review of the supplier, material and available production information before committing to volume. Watch the factory video

Meet the team and review the material and production information for your wall film.

Request a Supplier Video Review

Walls That Look Good and Stay Easy to Maintain

Corridors, reception counters and feature walls collect coffee, ink and scuffs every day. The organosilicon surface supports easy clean wall panels for hotels, offices and homes. Food, drink and lipstick stains showed no visible change after wiping in the recorded test; pen and marker stains could leave slight residual marking. Each result below lists the test conditions and source, so you can judge how it applies to your project.

Decorative wall film panel wiped with cleaning clothWatch video0:23

24-hour stain and wiping results

Nine contaminants were applied to the tested film and held for 24 hours at 25 °C before wiping. Coffee, wine, ice cream, sauces and lipstick showed no visible change. Ballpoint, water-based and oil-based pen marks showed no visible change or slight staining. Confirm the cleaning method on the film model and cleaners you plan to use.

Recorded result

Food, drink and lipstick: no visible change after wiping

Test conditions
Contaminant applied, held 24 hours at 25 °C, then wiped
Source
Laboratory data summarised in the product white paper
Applies to
The tested film sample; ask for the matching model reference
Contaminant, cleaning method and observed result (25 °C, 24 hours)
Contaminant Cleaning method Observed result
Coffee Wiped after 24 h No visible change
Red wine Wiped after 24 h No visible change
Ice cream Wiped after 24 h No visible change
Soy sauce Wiped after 24 h No visible change
Worcestershire sauce Wiped after 24 h No visible change
Lipstick Wiped after 24 h No visible change
Ballpoint pen, water-based pen, oil-based marker Wiped after 24 h No visible change to slight residual marking

Get the full cleaning and maintenance guide, with the recorded conditions behind each result.

Get the Cleaning & Maintenance Guide

Material Safety and Antibacterial Performance, Clearly Stated

Hotels, schools and family homes ask the same questions about indoor materials: is it safe to live with, and does it stay hygienic? Below, each claim is tied to what was tested and which product it covers, so you can match it to your own specification.

Decorative wall film panels in clinic waiting area
Silicone decorative film sample kit
  • Material declaration

    Material safety

    The supplied material literature declares that the decorative film is formaldehyde-free and formulated with No DOP. For a project specifying formaldehyde-free decorative film, request the declaration and relevant emissions data for the exact model. The material declaration alone does not establish the emissions of the adhesive, panel core or installed room.

    Declared
    PVC-free, 0 formaldehyde, No DOP
    Covers
    The decorative film only
    Ask for
    The declaration for the exact film model you plan to use
    Request the material declaration
  • Patent embodiment data

    Antibacterial surface

    The white paper reports an antibacterial rate of at least 99% against Escherichia coli and Staphylococcus aureus for a specific patent embodiment. Antibacterial agents and formulation grades are optional. Confirm the test method, contact time and report for the selected grade; this figure does not establish disinfection performance for every film model.

    Result
    ≥99% antibacterial rate against E. coli and S. aureus
    Covers
    The formulation in the embodiment; not automatically every model
    Ask which formulation fits your project

Buying laminated panels? The lamination adhesive and panel core are documented separately from the film. Tell us your requirements and we will list what each component's data covers, so you can assess the complete wall panel.

Share the safety and hygiene requirements your wall project must meet, and we will match them to the right film and data.

Submit Project Performance Requirements
Wall panel fire performance diagram linking film, adhesive, core and installation to applicable test data
Fire-performance selection diagram. Confirm the applicable report and tested build for your project.

Match Flame Performance to Your Project Requirements

Flame-retardant formulations are optional and must be confirmed for the selected decorative wall film. The white paper lists optional UL 94 V-1 / V-0 grades, but small-scale plastics data does not establish a building wall-panel classification. For a project calling for ASTM E84 surface-burning data or an EN 13501-1 reaction-to-fire classification, confirm the applicable report for the specified film, adhesive, core and installation configuration. No project fire class is claimed on this page.

What every flame data summary tells you

  • Test object

    Whether the film alone or a laminated panel was tested, with the film model and thickness.

  • Test method

    The standard named in the report, so you can compare it with the one your project calls for.

  • Test result

    The rating or measured values exactly as the laboratory reported them, without rounding up.

  • Scope of use

    Which substrates, thicknesses and builds the result applies to, and where further testing is needed.

Tell us your target market and the classification your wall must reach. We will tell you which data already exists for the film and what the complete panel would still need.

Share the fire rating your wall panels must meet, and get the flame data that matches it.

Ask for Flame Data for My Project

From On-Screen Colour to the Real Material

Browse the colour and texture directions shown in the supplied material product guide, then add your preferences to a sample list. Wood grain decorative film, fabric grain, leather grain and custom patterns are available by specification. Surface feel, gloss, stain and wear performance are confirmed for each selected formulation; model codes are assigned when samples are approved.

  • Decorative film colour and texture swatches

    Colour swatch collection

    Texture
    Colour and texture directions
    Selection
    Approve a physical sample
  • Dark wood grain silicone decorative film

    Wood grain panel sample

    Texture
    Dark wood grain
    Selection
    Gloss and grade confirmed per model
  • Lychee leather grain silicone decorative film

    Lychee leather grain

    Texture
    Cream leather grain texture
    Selection
    Colour and grade confirmed by sample
  • Grey fabric grain silicone decorative film

    Fabric grain panel sample

    Texture
    Grey fabric grain texture
    Selection
    Colour and grade confirmed by sample
  • Custom pattern silicone decorative film

    Abstract custom pattern

    Texture
    Pink abstract pattern direction
    Selection
    Custom artwork reviewed before sampling
  • Soft-touch silicone decorative film samples

    Soft-touch finish direction

    Texture
    Optional tactile surface
    Selection
    Feel and gloss confirmed by sample

Need a custom colour, texture or pattern?

Send a colour reference, an artwork file or a physical sample. We review the proposed pattern and confirm the surface formulation and sample with you.

Start a custom pattern

Feel the textures in your hand before you specify a wall.Your sample list is empty. Add patterns above, or request our full swatch set.

Request Pattern Samples


Different Spaces, Different Wall Questions

A hotel corridor and a family hallway both need decorative interior wall panels, yet they fail in different ways. Choose a space to see what usually matters there, which material direction fits, and which data to check before you order.

Wood grain decorative wall film

Feature walls, entries and hallways

Living room feature walls, bedroom headboard walls, entry and hallway side walls.

  • Main concerns

    Colour and touch that feel like home, kitchen and child-height stains, and daily rubbing along hallways.

  • Material direction

    Wood grain or soft-touch solids, supplied as rolls to your panel maker or as finished panels.

  • What to verify

    Physical texture samples, the 24-hour stain record, 2H scratch result and the film width for your panel size.

Browse finishes for homes

Planning a similar space? Tell us the wall area and how it is used, and we will suggest a film and panel combination.

Get Options for a Similar Space

Film Rolls or Laminated Panels: Choose How You Buy

As a decorative wall film supplier, we serve two kinds of buyers. Panel makers with their own lamination lines buy the film in rolls, while project buyers and distributors can order finished decorative interior wall panels. Designers can request colour samples or panel samples from either route.

  • Silicone decorative film roll

    Decorative wall film in rolls

    You keep control of the core, the press and the final panel, and add a functional organosilicon surface that sets your panels apart from standard décor paper or PVC finishes.

    Supply form
    Film rolls in selected widths and lengths
    Best for
    Panel and board manufacturers, laminators, furniture and wall panel factories
    Confirm first
    Your core, adhesive system, lamination line settings and required roll width
  • Dark wood grain silicone decorative film

    Film-faced decorative interior wall panels

    The film arrives already laminated, so your project skips the search for a lamination partner and receives panels ready for cutting and installation, with one supplier answerable for the surface.

    Supply form
    Laminated panels, standard 1220 × 2440 mm
    Best for
    Contractors, project buyers, distributors and fit-out companies
    Confirm first
    Panel core, thickness, surface pattern, edge and further processing needs
Recorded supply specifications
Item Film rolls Laminated wall panels
Effective width 1240 / 1260 / 1400 mm Matched to panel format
Roll length 50 / 100 / 250 / 500 m Not applicable
Panel size Not applicable 1220 × 2440 mm
Panel core and thickness Your own core Confirmed per project
Patterns and finishes Selected pattern and surface formulation confirmed for either supply route

Available width, length and pattern combinations are confirmed for each model.

Tell us whether you need rolls or panels, plus the quantity, and get a quotation for your route.

Get a Quote for Rolls or Panels

Bubbles, Edge Lifting or Delamination: Where to Look First

When a laminated panel fails, the film is only one suspect. Good wall panel lamination depends on the core, the adhesive, the line settings and the edges working together. We break the problem into these four checks and confirm them on a trial panel before production, to identify the processing fit before a volume order.

What the panel edge tells you

  • Well bonded

    Film flat and continuous, adhesive evenly spread, clean edges.

  • Bubbling

    Often linked to core moisture, dust, trapped air or uneven adhesive.

  • Edge lifting

    Usually traced to edge sealing, trimming, film tension or curing time.

  • Dimensional stability after heat

    0.06% length, 0.10% width

    100 °C for 600 min, then 14 h recovery at room temperature. SGS report PL01_EN, as summarised in the product white paper.

  • Bond between film layers

    ≥3 N/15 mm BOPET, ≥3.5 N/15 mm TPU

    180° peel, patent embodiment data. This describes bonding inside the film, not film-to-panel adhesion.

Four checks before production

  • Core condition

    Flatness, sanding, dust and moisture content of the board all decide how evenly the film can bond.

  • Adhesive match

    The adhesive must suit both the film backing and the core; we review your system before recommending a film.

  • Process conditions

    Temperature, pressure, line speed and curing time are set for the film and checked on a trial run.

  • Edge treatment

    Trimming, wrapping or edge banding protect the film edge, where lifting usually starts on wall panels.

Recommended trial sequence

  1. Share your build

    Send core type, adhesive, line settings and the finish you want.

  2. Receive a film proposal

    We suggest the film model, width and backing for your process.

  3. Laminate trial panels

    Run trial panels on your own line, then inspect them after conditioning.

  4. Confirm production settings

    Lock the confirmed settings and specification before volume orders.

Send your core and process details, and we will review the lamination fit before you commit to a run.

Submit Core & Process Details

How Our Film Compares With PVC Film, Melamine Paper, Paint and Wallpaper

Panel makers usually weigh our film against PVC decor film and melamine paper; designers and project buyers weigh it against paint and wallpaper. Each table answers the questions that matter for that decision, including the rows where other materials do well.

Decision question PVC decor filmPrinted PVC film laminated to boards Melamine paperResin-impregnated décor paper, hot-pressed Puremorfilm organosilicon filmPVC-free decorative wall film with a No DOP formulation
Base polymer Polyvinyl chloride (PVC) Paper, no PVC PVC-free carrier selected per model: PET/PETG, PC, PA, TPU, PP or ABS
DOP and formaldehyde Check DOP content and emissions data for each grade Decor paper impregnated with melamine resin or a resin mixture; check grade-specific emissions data Company-declared No DOP and formaldehyde-free film; confirm the selected grade
Look and touch Wide décor range; gloss and texture depend on grade Hard surface; texture limited by the press plate Wood, fabric, leather, colour and custom pattern directions; tactile finish optional
Stains and cleaning Depends on the topcoat Generally good stain resistance Organosilicon surface; 24-hour stain record for 9 contaminants
Scratch and wear Depends on the lacquer layer Hard surface with good wear resistance by grade Tested sample: no obvious scratch at 2H / 500 gf; slight matting at 2,000 Taber cycles under the conditions below
Heat and dimensional stability Heat and shrinkage performance vary with the PVC grade, thickness and process Dimensional stability depends on the paper, resin, board and pressing process 0.06% length and 0.10% width change after 100 °C for 600 min
Processing Flat lamination, membrane pressing and profile wrapping Short-cycle hot pressing onto flat boards Lamination with a matched adhesive; process confirmed per model on trial panels

General comparison of material categories. Individual PVC and melamine products vary by grade and maker; our figures are from the tests described on this page.

Using another wall finish today?

Send us the film, paper or finish you currently use. We test it beside ours under the same stain and cleaning conditions, so the comparison is on equal terms.

Arrange a side-by-side test

Compare cost and performance with the material you use now before you switch.

Compare With My Current Material

Specifications and Test Data You Can Evaluate

The figures below are transcribed from the supplied product white paper, which summarises four SGS reports. Confirm the original report, tested film model and applicability for your specification.

As a decorative wall film manufacturer, we publish the specifications and test summaries we can stand behind, together with the conditions they were measured under. That lets your purchasing and technical teams turn interest into a defined requirement, without guessing which figure applies to which product.

Supply specifications
Effective width 1240 / 1260 / 1400 mm
Roll length 50 / 100 / 250 / 500 m
Film thickness Confirmed per modelThe 80–1000 μm range in our white paper refers to the polymer base layer, not the finished film.
Surface finish Matte, textured, embossed or soft-touch, by pattern
Back treatment Matched to your adhesive system, confirmed per model
Laminated panel size 1220 × 2440 mm
Panel structure Film, lamination adhesive and core, confirmed per project
MOQ and lead time Standard film rolls start at 500 m; laminated panels are 1220 × 2440 mm and start at 200 sheets. Lead time is confirmed in the project quotation.
Decorative film roll with protective export wrapping

Test report summaries

  • SGS report PL02_EN

    Pencil scratch

    2H: no obvious scratches

    500 gf, 45°, three lines ≥20 mm. Report SZIN2608002405PL02_EN.

  • SGS report PL04_EN

    Taber abrasion

    2,000 cycles: slight matting only, no coating loss

    ASTM D4060-25, CS-10 wheels, 1,000 g per wheel, 60 rpm.

  • SGS report PL01_EN

    Dimensional stability

    Length 0.06%, width 0.10% change

    100 °C for 600 min, 14 h recovery at room temperature.

  • SGS report PL03_EN

    Tensile test

    A1: 216.4 N, 51%. A2: 126.3 N, 67%.

    JIS K 6732:1996+AMD.1:2006 and client requirements. Specimens 1 and 2 broke outside the gauge length; the report marks the tensile results as for reference only.

How colour and batches are controlled

  • Colour approval

    You approve a physical colour standard before production, so later batches are judged against a real sample, not a screen.

  • Retained samples

    Agree whether a sample from each production batch will be retained, and how it will be identified for later colour or performance checks.

  • Batch acceptance

    Acceptance items and tolerances are agreed in advance, so delivery checks are quick and objective for both sides.

Get the specification sheet and full report copies for the exact model you are considering.

Get Technical Data for My Model

Approve One Panel Before You Commit to the Whole Wall

Decorative wall film samples let you test colour, touch, lamination and cleaning under your own conditions. Four steps take you from a first request to a confirmed specification, so the wall that is installed matches the one you approved.

  1. Decorative wall film project brief covering material build, sample approval and order specifications

    Share use and requirements

    Tell us the space, wall area, supply form and any cleaning, flame or hygiene requirements.

  2. Silicone decorative film sample kit

    Choose film or panel samples

    We shortlist patterns and send film swatches, panel samples or both, matched to your route.

  3. Decorative wall film panel wiped with cleaning cloth

    Check colour, lamination and cleaning

    Confirm the real colour and touch, laminate on your core if needed, and try your own cleaners.

  4. Decorative wall film project brief covering material build, sample approval and order specifications

    Confirm specification and terms

    Lock model, width, quantity and acceptance items, then receive the quotation and schedule.

Look at a larger sample before you sign off

Small swatches cannot show grain direction, how panels meet at the joints, or how the surface reads under your actual lighting. For feature walls and long corridors, ask for a full-size panel and view it on site.

What a typical sample set includes

  • Film swatches

    Your shortlisted patterns, to judge colour and texture side by side.

  • Laminated panel sample

    Film on a standard core, to see the finished panel face and edge.

  • Large-format panel

    For checking grain direction, joints and lighting on site.

  • Test pieces

    Spare pieces for your own stain, cleaner and lamination trials.

Tell us your project, and we will put together the sample set that answers your open questions.

Submit My Sample Request

Wall Panel Guides

Wall Panel Materials

Compare panel bodies, decorative faces and complete wall systems for the room you are specifying.

Restaurant Wall Panels

Match decorative, preparation, washing and cooking-area walls to their different exposure and cleaning needs.

Hotel Wall Panels

Plan finishes, corridor repairs and documented wall constructions for lobbies, guest rooms and wet areas.

Questions Buyers Ask Before Choosing Decorative Wall Film

Short answers to the questions we hear most from panel makers, designers and project buyers. Each one links to the detail on this page.

Lychee leather grain silicone decorative film

Which interior wall panel uses is decorative wall film suited to?

It suits indoor wall panels that need a decorative look and easy maintenance: feature and headboard walls, hotel corridors and guest rooms, office reception walls and partitions, retail walls, and classrooms or clinics. See typical concerns for each space under wall applications.

What is the difference between film rolls and laminated panels?

Film rolls are for manufacturers who laminate onto their own cores. Laminated panels arrive with the film already bonded, in 1220 × 2440 mm, ready for cutting and installation. Pattern and surface formulation are confirmed for the selected roll or panel specification. Compare them in supply options.

Can the film be used with my existing core and lamination process?

Compatibility must be confirmed for your film model, core, adhesive, line settings and edge treatment. We review your process and use trial panels to check the build before production. See the lamination fit checklist.

How should the surface be cleaned?

Wipe with a soft damp cloth; for stubborn marks, use a mild cleaner and avoid abrasive pads. In laboratory testing, coffee, wine, sauces and lipstick left for 24 hours wiped off without visible change. Test your own disinfectants on a sample first. Details are in surface durability.

Does a formaldehyde-free film mean the whole wall panel is formaldehyde-free?

No. The declaration covers the film. The lamination adhesive and panel core are separate materials with their own data, and both affect the finished panel. See material safety for how each part is documented.

Is the film PVC-free with a No DOP formulation?

The described carrier options are PET, PETG, PC, PA, TPU, PP and ABS rather than PVC. The company literature declares the film to be formulated with No DOP and made without formaldehyde. Request the declaration for the exact grade; this does not establish zero migration of all ingredients or the emissions of a complete wall panel. See how it compares in the material comparison.

Does the flame report apply to the film or to the complete panel?

It depends on the test object and applicable standard. Film-level or UL 94 results do not establish a wall-panel building classification. Confirm the report for the film, adhesive, core and installation configuration specified for your project. Read more in flame-retardant selection.

What does 2,000 Taber abrasion cycles mean for a wall?

Under ASTM D4060 with CS-10 wheels and 1,000 g per wheel, the film showed only slight matting after 2,000 cycles, with no coating loss or exposed base film. The result applies to the tested sample under those conditions; it does not convert directly into years of service.

Which formulation does the ≥99% antibacterial rate apply to?

The white paper cites patent embodiment data against E. coli and S. aureus for a specific formulation. Antibacterial grades are optional; request the method, contact time and data for the exact grade and model you plan to use.

How do I choose the film width?

Effective widths of 1240, 1260 and 1400 mm are available. The 1240 and 1260 mm widths cover a 1220 mm panel with trimming margin; 1400 mm suits wider formats. Tell us your panel size and we confirm the width per model.

Can you customise colours, textures and patterns?

Yes. Send a colour reference, artwork or a physical sample. We review feasibility and confirm the pattern, surface formulation and physical sample with you. Start from the pattern library or ask for a custom design.

How do I request samples, confirm specifications and get a quote?

Use the project form to share your use, supply form and quantity. We send a matching sample set, confirm the specification with you, then quote. The steps are shown in sample validation.

Have a question that is not listed? Ask our team about your specific wall project.

Ask a Technical Question

Choose the Right Decorative Wall Film and Panels for Your Project

Tell us who you are and what the wall needs to do. We match the decorative wall film, supply form and data to your project, and send samples you can test before anything is ordered.

  • Panel makers: share your core and process for a lamination review
  • Designers: send pattern references for matching samples
  • Buyers: add specification and quantity for a quotation
Silicone decorative film sample kit

Your project and sample request

Only email is required. Extra fields appear based on your role.

I am a

Please enter a valid email address.

Key requirements (optional)

We use your email only to reply to this request. Privacy policy.

Send your details and receive a sample set matched to your wall.

Puremorfilm video