puremor FILM
Puremorfilm · Wood grain film rolls

Wood Grain Decorative Film for Furniture and Interior Lamination

Oak, walnut and ash looks on a silicone functional surface, supplied in rolls for flat lamination on your own boards. Choose from more than 100 patterns, or send a reference for a custom wood look.

PVCMelaminePPPETGSilicone functional surface

A new paint-free finishing material: the decorative face is a silicone functional layer, a different surface from PVC, melamine, PP and PETG decorative faces.

2HPencil test, no obvious scratches (SGS, film specimen)
No DOPFurniture film formulation
0Formaldehyde
1M+ m²Monthly film capacity
Interior concept with warm oak-look wardrobe doors and vertical wall panels

Flexible wood grain decorative film roll
01 / Problems and solutions

Wood-Look Surface Problems and How Our Film Answers Them

Most complaints about wood-look doors and panels show up after installation: heat near the oven, kitchen stains, daily scratches, ageing. Here is what each problem looks like and the recorded result that answers it.

Furniture decorative film on kitchen cabinets

Doors next to the oven lift and bubble

Cabinet makers single out thermofoil and laminate doors as the fronts most sensitive to oven heat, and repeated heat and steam can stress the film bond at edges and corners.

Sources: KraftMaid heat shield guidance; CabinetIQ thermofoil guide.

Our recorded result

After 600 minutes at 100°C and 14 hours of recovery, our film specimen changed 0.06% in length and 0.10% in width (SGS). The result covers the film, so trial your full door construction too.

Easy-clean silicone furniture film wiping coffeeWatch video0:23

Kitchen stains stay in the grain

Coffee, red wine and soy sauce get left on kitchen doors and tabletops for hours. Deep wood textures make wiping them out harder.

Our recorded result

In the manufacturer’s laboratory tests, coffee, red wine, ice cream, soy sauce, Worcestershire sauce and lipstick left at 25°C for 24 hours wiped off with no obvious change.

Furniture film tabletop with keys and fine scratchesWatch video0:22

Daily handling scratches a new door

Keys, rings, toys and chair backs mark door fronts and furniture tops within months of use.

Our recorded result

SGS tests on our film: no obvious scratches with a 2H pencil at 500 gf and 45°, and only slight mattification after 2,000 Taber cycles with CS-10 wheels at 1,000 g.

Furniture film surface with cigarette scorch and ashtrayWatch video0:32

A cigarette leaves a permanent mark

One careless moment on a desk, cabinet top or hotel furniture can scorch the surface, and the whole panel has to be replaced.

Our recorded result

In the manufacturer’s laboratory tests, contact with a cigarette at a 200 to 300°C surface temperature for 30 seconds or more left no obvious change. This is a contact test, not a fire rating.

Soft-touch silicone decorative film samples

Plasticized films can stiffen as they age

Flexible PVC relies on plasticizers. Research on PVC objects shows that when plasticizer migrates out of the surface layer, that layer can turn stiffer and more brittle.

Source: Bujok et al., migration of phthalate plasticisers in PVC (2025).

What we supply

Our furniture film uses a No DOP formulation and contains zero formaldehyde. The decorative face is silicone on a PET support film.

Light dark and cool wood grain decorative film

The wood look on screen is not the one delivered

Tone, grain scale and sheen change under your lighting and across a full-size door. A photograph cannot settle them.

What we do

We send physical film samples from more than 100 patterns, and you approve a laminated trial panel before ordering. The approved sample becomes the reference for repeat orders.

02 / Material comparison

How Does Silicone Wood Grain Film Compare with Other Wood-Look Surfaces?

Each wood-look route puts a different material on the face. The table shows what sits on the surface and how it is applied; our column lists recorded results for the film specimen. For a wider view of door materials, see kitchen cabinet materials and thermofoil vs laminate.

Our figures refer to the recorded film specimens and stated conditions; they are not finished-panel ratings.
Item Our silicone wood grain film PVC thermofoil Melamine (decor paper) Painted wood look
Decorative face Silicone functional layer on PET support film PVC film Resin-impregnated decor paper Coating system on the board
How it is applied Flat lamination with PUR adhesive on your line Heat and vacuum pressing over the door profile Pressed onto the board under heat and pressure Sprayed coats with curing between them
DOP No DOP in our furniture film Depends on the formulation Check with the supplier Check with the coating supplier
Heat near appliances 0.06% / 0.10% size change after 100°C for 600 min (SGS) Named by cabinet makers as heat-sensitive Depends on the board and edge sealing Depends on the coating
Scratch and wear 2H pencil, no obvious scratches; 2,000 Taber cycles, slight mattification (SGS) Depends on the topcoat Depends on the paper and overlay Depends on the coating
Wood look and touch 100+ patterns; matte, soft-touch or brushed grain; custom looks on request Printed grain Printed decor paper Colour only, unless printed or veneered
03 / Wood grain finishes

Choose Your Wood Grain Finish

Start with one of the previews below, then compare the physical swatch beside your other materials and under your project lighting. Pick a preview to add it to your request.

100+

Patterns ready to sample, plus custom wood looks

Send a photo, an existing door or a decor reference. We can adjust the grain, tone, gloss and surface feel to your collection, and confirm feasibility and terms before proofing.

Discuss a Custom Wood Look

Need leather, stone or solid colours instead? Browse the full range on our furniture decorative film page.

04 / Specifications and supply

Wood Grain Film Roll Specifications

We supply the film in rolls for your own lamination line. Widths and roll lengths below are the standard options; the combination for each model is confirmed with your quotation.

Source: Puremorfilm technical white paper, section 13.1 (October 2026).
Item Specification
Effective width 1240 / 1260 / 1400 mm, by model
Roll length 50 / 100 / 250 / 500 m, by model
Film thickness 80 to 1000 μm
Support film PET in stable production; other bases by project
Patterns 100+ ready to sample; custom wood looks on request
Lamination Flat lamination with PUR adhesive
Film-faced panels Available on request; film rolls are our main supply

What sits in the film

Five layers, from the touch face down to the support film. The silicone layers are chemically anchored to the PET film.

Silicone touch layer (optional)5–30 μm
Silicone surface layer20–100 μm
Silicone structural layer100–250 μm
Silicone bonding layer50–150 μm
PET support film80–1000 μm
05 / Where to use it

Where Can You Use Wood Grain Silicone Film?

Use it on vertical and furniture surfaces that people touch and clean every day. Keep it off surfaces that people walk on or that sit on a cooktop.

Suitable

  • Kitchen cabinet and wardrobe doors. Plan the grain direction across adjacent fronts before cutting.
  • Furniture exterior parts. Desks, tabletops, storage units and hotel or office furniture.
  • Interior wall panels. Larger pattern areas; see our decorative wall film for wall-specific needs.
  • Rooms for children and kitchens. Zero formaldehyde and a No DOP formulation in the furniture film.
Not suitable

  • Floors and stair treads.
  • Cooktop and stove countertops.
  • Shower floors and other wet walking areas.

The film has a leather-like touch and some elasticity, so it is not made for foot traffic or direct cooktop contact.

06 / Recorded results

What Do the Tests Show for This Film?

Three results come from SGS reports on film specimens submitted in August 2026. Laboratory and patent data are listed separately below, each with its method and conditions.

Pencil scratch · SGSNo obvious scratches

Mitsubishi Uni 2H pencil, 500 gf, 45°, three strokes of 20 mm or more.

Taber abrasion · SGS2,000 cycles

ASTM D4060-25, CS-10 wheels, 1,000 g per wheel, 60 rpm. Slight mattification only; no concentrated scratches, exposed base or coating peeling.

Heat stability · SGS0.06% / 0.10%

Length and width change after 600 minutes at 100°C and 14 hours of room-temperature recovery.

Manufacturer’s laboratory tests: stains, chemicals and cigarette contact
  • Coffee, red wine, ice cream, soy sauce, Worcestershire sauce and lipstick, 24 hours at 25°C, then wiped: no obvious change. Ballpoint, water-based and oil-based pens: no obvious change or slight staining.
  • 75% alcohol, 75% acetone and light petrol: no obvious change.
  • Cigarette contact at a 200 to 300°C surface temperature for 30 seconds or more: no obvious change. This is a contact test and not a fire rating.
Worked examples in the patent application: layer bonding and ageing
  • 180° peel strength of at least 3 N/15 mm in a 125 μm BOPET system.
  • No delamination or blistering after 500 hours at 85°C and 85% RH, after 100 cycles between −40°C and 85°C, and after 12 hours in boiling water.
  • Antibacterial grade (optional, formulated to order): at least 99% against E. coli and S. aureus in the worked examples.

Our patent application is pending. These figures come from its worked examples and are not third-party test results.

Flame retardancy and other requirements
  • Flame retardancy is a standard property of the film. It is a film-level property and does not give a fire rating to a finished board or piece of furniture.
  • Name the standard your project requires, and we will tell you which documents exist for the model you select.

All results apply to the film specimens and conditions stated. They do not rate a finished board, cabinet or room; confirm those with your laminated construction.

07 / Production and lamination fit

Who Makes the Film, and How Does It Fit Your Line?

We produce the film roll to roll: silicone layers are coated in stages and cured into one crosslinked network on the PET support film, then slit and packed as rolls. Watch the factory video

Experience10+ years

In decorative surface materials.

Production6 lines

For printing, coating and lamination.

Capacity1M+ m²

Monthly film capacity.

Patterns100+

Ready to sample, with custom looks on request.

Coating and surface-treatment equipment on our film production lineFactory video1:15
Coating and surface treatment
Operators inspecting sheet material during production
Material inspection
Packed film rolls and cores in storage
Roll storage and packing

Our production floor: coating, material inspection and roll packing.

Send these four details for a lamination trial

Substrate

Board type, thickness and surface condition.

Adhesive

The PUR adhesive you use or plan to use.

Equipment

Your flat lamination line and its current settings.

Part layout

Part sizes, grain direction and edge processing.

We check the combination with you and run a trial before a volume order. More background is in our guide on how to laminate MDF.

08 / From sample to shipment

How Do You Go from Sample to Delivered Rolls?

Five steps. The approved trial panel becomes the reference for production checks and for every repeat order.

Choose samples

Pick previews or send a reference; we send the closest physical film samples.

Trial on your line

Laminate the film on your substrate with your adhesive and settings.

Approve and quote

Record the approved sample, then confirm width, roll length, quantity, price and lead time.

Produce and inspect

Agree the acceptance points with us before production; we produce to the approved reference.

Pack and dispatch

Agree roll labelling and protective packing for transport to your destination.

Wood grain film buying questions

Short answers before you request samples. Ask us anything else in the form below.

Is the wood grain film PVC-free and formaldehyde-free?

Yes. The decorative face is silicone on a PET support film, and the furniture film uses a No DOP formulation and contains zero formaldehyde.

How is the film applied?

By flat lamination onto your board with PUR adhesive. We do not currently supply it for profile wrapping or vacuum thermoforming.

Can you match a wood look I already use?

Yes, you can start from your reference. Send a photo or physical piece; we suggest the closest of our 100+ patterns or discuss a custom proof, with feasibility and terms confirmed first.

Do the SGS results apply to my finished doors?

No. They apply to the film specimens tested. Your laminated door depends on the board, adhesive and process, so confirm it with a trial and your own acceptance tests.

Can I use it on countertops or floors?

No. Keep it off floors, stair treads, cooktop countertops and shower floors. Use it on doors, furniture parts and interior walls.

How are MOQ, price and lead time set?

For production orders, standard film starts at 500 m. Panels are 1220 × 2440 mm with a minimum of 200 sheets. Price and lead time are quoted for the model, width, roll length, quantity and destination you need. Send those details with your request to get a quote.

Can I order film-faced panels instead of rolls?

Yes. Film rolls are our main supply, and we can also supply film-faced panels at 1220 × 2440 mm with a production MOQ of 200 sheets. Send the board type, thickness and quantity with your request.

09 / Tell us what you are making

Request Wood Grain Film Samples or a Project Quote

Share your preferred finish and application. Add the details you know; an email address is enough to start the conversation.

  • Discuss current physical film sample options
  • Request information for the selected film grade
  • Share lamination and quotation requirements
  • Ask about film-faced panels

Main supply: film rolls.
Film-faced panels: available on request.

Wood grain decorative film · physical samples confirm the final selection.

Your details will be used to respond to this product or project request.

Describe your selected reference and any panel needs in the message. Only email is required.

Light dark and cool wood grain decorative film

Wood grain decorative film patterns

Puremorfilm video